Basic HTML Version
Page 92 • Catalog 207
727-446-1656 • 1-800-446-1656 • www.depcopump.com
25 GPM POLYPRO DRUM PUMPS IN 27", 35
1
/
2
", 40" AND 47"
These polypropylene pump tubes will mount easily on any of the Jabsco electric or
pneumatic motors listed above (also refer to their corresponding flow curve). Each pump is
sealless allowing the fluid to only contact the polypropylene housing, polypropylene impeller
and the carpenter 20 shaft. Not recommended for viscosities over 750 cp.
25 GPM KYNAR DRUM PUMPS IN 27", 35
1
/
2
", 40" AND 47"
These Kynar pump tubes will mount easily on any of the Jabsco electric or pneumatic motors
listed above (also refer to their corresponding flow curve). Each pump is sealless allowing
the fluid to only contact the Kynar housing, Kynar impeller and the Hastelloy
®
C shaft. Not
recommended for viscosities over 750 cp.
25 GPM, 316SS DRUM PUMPS IN 27", 35
1
/
2
", 40" AND 47"
These 316 SS pump tubes will mount easily on any of the Jabsco electric or pneumatic motors
listed above (also refer to their corresponding flow curve). Each pump is sealless, allowing
the fluid to only contact the 316 stainless steel housing, Tefzel impeller and fittings, and the
316 stainless steel shaft. Not recommended for viscosities over 750 cp.
Model
Description
16520-3270 27" Kynar tube with 1" barbed discharge
16520-3350 35.5" Kynar tube with 1" barbed discharge
16520-3400 40" Kynar tube with 1" barbed discharge
16520-3470 47" Kynar tube with 1" barbed discharge
Options
Description
18753-0080 Drum Adapter
16490-1001 Tefzel strainer (screws onto bottom of pump)
16470-0000 Wall mount storage bracket
18753-0077 Adjustable on/off nozzle
Model
Description
16400-3270 27" Polypropylene tube w/1" barbed discharge
16400-3350 35" Polypropylene tube w/1" barbed discharge
16400-3400 40" Polypropylene tube w/1" barbed discharge
16400-3470 47" Polypropylene tube w/1" barbed discharge
Options
Description
18753-0080 Drum Adapter
16490-1000 Polypropylene strainer (screws onto bottom)
16470-0000 Wall mount storage bracket
18753-0077 Adjustable on/off nozzle
Model
Description
16410-3270 27" 316 SS tube with 1" barbed discharge
16410-3350 35.5" 316 SS tube with 1" barbed discharge
16410-3400 40" 316 SS tube with 1" barbed discharge
16410-3470 47" 316 SS tube with 1" barbed discharge
Options
Description
18753-0080 Drum Adapter
16490-1001 Tefzel strainer (screws onto bottom of pump)
16470-0000 Wall mount storage bracket
18753-0077 Adjustable on/off nozzle
16471-0000 Ground wire
JABSCO
Kynar
JABSCO
316 Stainless
JABSCO
Electric and Pneumatic Motors
JABSCO DRUM PUMPS
JABSCO DRUM PUMP MOTORS
Jabsco’s electric and air driven motors will handle
viscosities up to 750 cp when mated with any of
Jabsco’s pump tubes.
Model
Description
16450 Series 115 vac, 60 hz (16450-0115),
or 230 vac 50 hz (16450-0220),
single phase motor with manual reset
circuit breaker, easy to use rocker
switch, and 16 feet of oil resistant cord.
16440-0000 .36 HP, 8000 rpm air motor with
1
/
8
" FPT air inlet.
Maximum air required: 15 cfm at 80 psi.
80
70
60
50
40
30
20
10
0
5
10
15
20
25
30
FLOW (GPM)
HEAD – FEET
Electric 31 SSU
Electric 500 SSU
Pneumatic 31 SSU
Pneumatic 500 SSU
Polypropylene
JABSCO