Basic HTML Version
www.depcopump.com • 1-800-446-1656 • 727-446-1656
Catalog 207• Page 131
SUPER SANITARY ROTARY LOBE
DESIGN FEATURES
• MOST STRINGENT HYGIENIC STANDARDS
Flush rotor fixing screws are sealed to prevent product ingress. Contoured
rotor case internals for full drainability during SIP and shaft seals set
up front where the pumping action is. Fully conforming to 3A hygienic
standards and utilizing materials which meet FDA requirements.
• LOW MAINTENANCE COSTS
Single shaft seals are fully accessible from the front of the pump without
disturbing the process pipework. Simple bearing assemblies easily
preset using automotive technology. Bi-wing rotors require no timing
adjustments. Even the pump casing is removable in place, a feature not
normally associated with other bi-wing rotor pumps.
• HIGH VOLUMETRIC EFFICIENCY
The bi-wing rotors incorporate the lowviscosity efficiency associatedwith
circumferential piston pumpswith the viscous product handling capability
of tri-, quad-, and bi-lobe rotor pumps… at an affordable price!
• RUGGED DESIGN
Hy~line design utilizes extremely large shaft diameters mounted in high
specification taper roller bearings, fitted into an extremely rigid central
pillar made from a high grade alloy. This is all enclosed in an oil filled
housing made from the same alloy. These, together with wide tipped
rotor wings, which adds another dimension to security, avoid premature
pump failure due to overpressure or other abuse.
OPTIONS
• SEALS
Front loaded single mechanical face type seals
of hygienic design.
Materials include carbon, stainless steel, and silicon carbide.
Low pressure flushed seals
utilize the same single mechanical seal with
an additional housing.Alowpressure flush liquidwashes away crystallizing
products or liquids which 'skin over'.
Double mechanical seals
utilizing all the components from single seals.
Used for hazardous, toxic, highly abrasive, or sterile products.
Front loadedsingleo-ringseals –
a lowcost seal optionusedprimarilyfor self
lubricating products and products which contain little or no abrasives.
Front loaded double o-ring seals –
suitable for pressurized grease or
flushing with a suitable liquid to enable low cost sealing of high sugar
confectionery and bakery products.
Multiple PTFE lip seal –
complete with controlled release food grade
grease injection system, the ideal sealing system for chocolate and other
products sensitive to water flush.
• CONNECTIONS
All US and European standards including DIN, SMS, RJT, IDF, Tri-Clamp,
ACME, NPT and BSP. Most pumps available with 2 different sizes, all fully
interchangeable.
• ELASTOMERS
Nitrile, Viton, EPDM, and PTFE product contact joints available in
compounds conforming to 3A Sanitary Standard 02-10 and FDA title 21
section 177.2600.
• OTHER OPTIONS
Pump head temperature control jackets
Integral pressure relief valve
Enlarged ports
HY ~ LINE
JABSCO
JABSCO
Hy-Line 42 thru 64
Hy-Line 32/34 and 72/74/76
Electro-polish
All stainless steel bearing pedestal and cover
Low carbon 316L pump head
Rectangular inlet
Hydraulic drive
PUMP MODEL
LH32
LH34
LH42
LH44
LH52
LH54
LH62
LH64
LH72
LH74
LH76
Port Size (inch)
3
/
4
or 1
1 or 1
1
/
2
1 or 1
1
/
2
1
1
/
2
or 2
1
1
/
2
or 2
2 or 3
2, 2
1
/
2
or 3
3 or 4
3 or 4
4 or 6
5 or 6
Displacement gall/100 rev
0.9
1.8
3.2
5.4
7.0
12.0
16.8
25.0
32.5
54.2
80
Maximum Flow US GPM
13.7
27.7
32
54
67
115
121
180
221
325
478
Maximum Pressure PSI
215
115
215
115
215
115
215
115
215
115
72
Maximum Speed (RPM)
1500
1500
1000
1000
960
960
720
720
680
600
600
Dimensions LxWxH inches 8x7.5x6.5 9x7.5x6.5
11x9x8
11x9x8
15x10x10 15x10x10 17x11x12 18x12x12 19x15x14
21x15x14
22x16x14
Weight (bareshaft) lbs
18
22
40
44
71
77
134
143
275
319
364
Temperature °F
-22 to 284
Viscosity cp
1 to 1 million